Now in this season, many households begin to decorate their own homes, but there are so many decoration materials on the ground in the market. The laminate is one of them. After choosing the desired flooring, then, the laminate is installed. What is its process flow?
1. Clean up the construction site, clean up the garbage on the ground, including every corner, the ground is not clean, and there will be a feeling of "sand" under the floor later.
2. Then the ground shall be leveled, and the horizontal error shall not exceed 2mm. If it exceeds 2mm, we shall find a way to level it. If the ground is uneven, the feeling of feet will be bad after the floor is paved. Then, the edges, corners and other parts of the ground protrusion or uneven parts are trimmed.
3. After the floor is cleaned, the damp proof course is paved, which can prevent the floor from getting damp in the future. The damp proof course shall be paved and the joints shall be closed together.
4. The following work is to officially start the installation of the floor, because the floor is to be installed in a staggered way. First of all, it is necessary to pave the floor in advance, divide part of the floor into two parts, and saw according to the size. In case of more saws, the floor loss will be large.
5. Before sawing the floor, the whole floor can be unpacked, and the floor with problems or defects can be picked out for sawing. In this way, the floor with local problems can be fully utilized without excessive loss. Do not come up and take the floor to saw, it will increase the loss.
6. The place where the floor is sawed must be in the balcony and other places where the tiles are good for cleaning, otherwise the splashed wood ash will enter everywhere, which is difficult to clean.
The above is the specific installation project of the laminate floor. After reading it, when you install the floor in your own home, you can have a clear idea and save a part of the cost.