Nowadays, the decoration industry is developing rapidly. When decorating, many people will choose to strengthen the composite floor. It has high wear resistance, good quality and strong practicability, which is very conducive to our home life. But overall costs could be high.
Installation method of reinforced composite floor
1. Installation of reinforced composite floor - Preparation
(1) First check the model and quality of the floor, then check its color, check the number of floors, prepare the installation kit, and read the installation instructions.
(2) Visit the installation site, measure the required data, plan the installation route, and then determine the specific operation plan.
2. Reinforced composite floor installation - Drilling
(1) Before installing the floor, mark the corresponding position according to the measured size, and then drill holes on the wall with an electric drill to prepare the work of skirting line.
(2) According to the manufacturer of the reinforced composite floor, in order to improve the fastness of the skirting line, the distance of each nail should be reasonable, generally no more than 50cm. The wood block should be nailed in the drilled hole, and the nail for fixing the skirting line should be nailed on the wood block.
3. Reinforced composite floor installation - laying and prevention works
(1) Before laying the damp proof course, the ground shall be cleaned first, and the ground shall be dry without any residual water source. The two damp proof courses shall be sealed with tape to ensure the sealing effect.
(2) When paving the floor, pay attention to the gap between the floors, and then pave a piece of laminate floor in a certain direction, and the overall laying is completed.
4. Laying damp proof course - skirting line
(1) When fixing the skirting line, the ugly gap between the floor and the wall should be covered naturally. In order to achieve a coordinated decorative effect, the skirting line can be selected according to the door pocket color or the floor color.
(2) At this stage of installation, even if the whole process is completed, you can check whether you are depressed or missing, and then do a detailed treatment.
Installation precautions of reinforced composite floor
1. 2-3 days before installation, make sure the ground is dry, flat and clean without cross construction.
2. check
(1) When the floor is delivered, first confirm whether the delivered floor is consistent with the contract, check the floor brand, specification, quality, quantity, etc.
(2) Open package 2-3 for inspection at will, sign on the inspection sheet after confirming that there is no problem, and reject the floor that does not meet the requirements.
3. Before construction, check the laying direction and method determined in advance with workers again to avoid problems in installation and reduce accidents.
