Quality of laminate flooring
The quality of laminate flooring mainly includes the following aspects:
① Base material origin: good base material of Daya;
② Floor thickness: 8mm and 12mm;
③ Environmental protection grade (formaldehyde emission): generally, E1 and e0.e1 are formaldehyde emission ≤ 1.5mg/l, E0 is formaldehyde emission ≤ 0.5mg/l. E1 in the national standard is basically harmless to human body;
④ Wear resistant speed: 4000 rpm is low standard, generally 6000 rpm, and 9000 rpm.
As an ordinary consumer in the purchase of flooring, at least it should be asked symbolically, and let businesses provide quality inspection reports. Although all flooring in the building materials market are almost in line with national standards, at least one of the best flooring can be selected.
On the floor of the wisdom of "three floors seven pavement", we can see the importance of floor pavement, choose a large brand of floor, one of the main reason is to rely on the regular floor enterprise standard installation, also expect them from sales to installation to after-sales one-stop standard service.
Reinforced composite floor and its accessories
We must be very concerned about the environmental protection of the floor, but when laying the floor, the floor mats, skirting lines and battens are installed together with the floor. How many people have thought about whether the above three items are environmentally friendly?
The color of the skirting should be the same as that of the door. And practice has proved that as long as it is not the same color with the door's skirting line, it does not look so comfortable.
General aggrandizement compound floor manufacturer does not produce skirting line, batten and ground mat alone. Although the floor is various, the skirting line and the batten seem to be the same.
① Skirting board: almost all floor manufacturers use MDF, and in order to reduce costs, the quality of MDF they choose is really worrying. The inferior MDF not only exceeds the formaldehyde standard, but also has the possibility of deformation and rupture.
2. Layering: ten can't wait to see nine of them are exactly the same kind of aluminum buttons with stripes on them. This kind of pressing takes a little longer, and there will be ash in the horizontal lines, which looks very dirty.
③ Floor mats: don't look at the floor mats sometimes stacked with various brands. If you look carefully, you will find that those words are printed on the back, and the material of the floor mats themselves is the same.
The reason why businesses "take shortcuts" in these accessories of the floor, on the one hand, is to reduce costs, on the other hand, it is also related to the fact that consumers don't pay much attention to these seemingly "trivial" contents. Because most consumers really only care about the price, design and style of the floor.
Big brand services
Under the influence of the sentence "three floors and seven pavements", we should attach great importance to this link of floor paving, so no matter what brand of floor is selected, we should try our best to let the manufacturer be responsible for door-to-door installation, and put forward high requirements for the treatment of the flatness of the wall enclosure of the decoration team.
The experience of strengthening composite floor
① It's no big deal to knock or touch the laminate floor. Its natural enemy is only water. No matter how good the laminate floor is, don't use too much water to wipe it, but also avoid being blistered, or it will deform.
② Many people are used to putting a mat on the floor at the door of the toilet after decoration. If the floor is laid outside the toilet, it is not correct. Because the moisture of the mat will affect the floor below, and the floor is easy to deform after a long time. However, it is necessary to put a mat in that area, because the water in the toilet is easy to be taken to the outside floor, so it is recommended that you put the mat in the bathroom door.
③ Although the floor is afraid of water, it can also be wiped with a wringing wet mop when cleaning, because the water on the floating surface will evaporate in a short time.
④ Order the floor to make rich, in the premise of standardized installation, the floor order area should not exceed 105% of the actual pavement area, if the home pavement area is not standardized or the workers do not follow the specification, it may also be greater than 105%.
⑤ Don't forget to talk to the manufacturer of laminate flooring in advance: you can return the multi order flooring.
⑥ When sawing the floor, there is a large amount of dust, so it is necessary to put forward the operation of this link in the corridor with the workers.
⑦ Before paving the floor, the ground should be clean and flat. If it needs to be leveled, it should be finished in advance (the floor company can first visit the site to survey the ground situation).
⑧ Before paving the floor, the main work of decoration should be completed to avoid the abuse of the floor. If you don't say anything else, you are distressed.
⑨ The floor must be dry on the day of installation. This is a special reminder to pave the first day of the floor, the ground must not be wiped with a wet mop. This will cause the ground to seep and return to moisture after the floor is paved.
⑩ The paved floor generally adopts smooth pavement, that is, the length direction of the floor should be perpendicular to the wall where the window is located.
When applying glue to the pavement floor, apply it on the full edge until the glue overflows from the seam when the floor is closed, and do not only point two points on both ends of the plate.
When installing the floor, make sure that the buckle is directly below the door, and pay attention to the distance between the door and the ground.