In just a few years, from the popular tile laying to the current popular floor, this is because the laminate floor is durable and beautiful, and is the best choice for home floor. Strengthening the laying of composite floor is a certain process, and it is also necessary to strengthen the cleaning and maintenance of composite floor in daily life. Let's take a look at the laying process and daily cleaning and maintenance of composite floor.
Laying process of reinforced composite floor:
Floor laying is a meticulous project, as the saying goes, only slow work can produce fine work. Do not blindly pursue the construction progress, only do a good job in the corresponding moisture-proof measures, strictly control the paving process to ensure the durable floor.
1、 Before laying, the workers in charge will first select the color difference and pattern of the floor, classify the floor with the color and pattern close to each other, carefully select the color difference of the floor, and deal with the pattern combination if there are patterns, so as to reduce the color difference as much as possible.
2、 When laying, the first row of floor shall be laid from 900mm, the second row from 600mm, the third row from 300mm, and so on, so as to save unnecessary material waste.
3、 When laying, it is also necessary to leave a 10 mm expansion joint at the surrounding wall. In addition, a 1 mm wide plastic sheet shall be inserted between every three floors to leave enough expansion joints. The floor groove shall be drilled with a 3 mm drill at a 45 degree angle, and then fixed with steel floor nails. In this way, the construction can ensure the firmness of the floor without warping and other problems. When assembling two floors, it is not allowed to directly knock the floor notches with a hammer, but should use the sawed floor debris, and then use the hammer combination to assemble the notches.
Only through a series of standardized construction, can we meet the strict requirements for the beautiful floor and ensure the durable floor.
Strengthen the common sense of composite floor maintenance and cleaning:
1. In daily use, pay attention to avoid scratching the floor with heavy metal sharp utensils, glass tiles, shoes nails and other hard utensils;
2. When moving furniture, do not drag on the floor surface; do not make the floor contact with open fire or directly place high-power electric heater on the floor;
3. It is forbidden to place strong acid and alkaline substances on the floor; it is forbidden to immerse in water for a long time.
4. The humidity in the room should not be too high. Keep the floor dry and clean. Use the dried cotton mop for daily cleaning. In case of stubborn stains, use the neutral cleaning solvent for wiping and then use the dried cotton mop for wiping. Do not use acid, alkaline solvent or gasoline and other organic solvents for wiping.
5. In case of large-scale water immersion or water immersion by the director of the Bureau for a long time, if there is any open water retention, it shall be timely dried with a dry cloth and allowed to dry naturally. It is strictly prohibited to use an electric heater to dry or expose to the sun.
6. Clean and vacuum the floor regularly to prevent sand or friction dust from accumulating and scraping the floor surface. The insole can be placed outside the door to avoid bringing sand or friction dust into the room.
Many consumers want to know about the laying process and cleaning and maintenance of the laminate flooring. We have made a detailed introduction above. I hope this article can help you.